RAPID numbers

To issue a RAPID number we must know the exact location of your driveway access into the property. This is because RAPID numbers are allocated according to a measurement from your driveway.  We often do not have knowledge of the access even after a subdivision or building completion.

We request a copy of an aerial map where you have marked where the driveway access is located when ordering a RAPID plate.  The same map is required even if you do not request a plate.

One way we determine this is if the speed limit for your road. If it is 50km, it is likely to be an urban numbering area.  You can contact us directly for a street number if you don't have one.

Speed limits of 60km or higher on your road indicates a rural area. Apply for a RAPID plate above.

Otherwise a distinctive blue and white number plate at the entrance of your property will indicate that your property has a RAPID number.

New: Vacant sections without a vehicle crossing or access into the property are unlikely to have a RAPID number allocated.  Once a new driveway has been added, we are able to measure and allocate your RAPID number.

Replacement: Select this option if you already know of an existing RAPID number and need your plate replaced for any reason.

The RAPID number is geo-located and recorded on the council's GIS (Geographic Information System).  NZ Post, Quotable Valuation NZ and Land Information New Zealand are all advised.  Other private organisations (Google, Homes.co.nz etc) are updated through their own sources and in their own time.

As with all street numbering, it is important that the correct street numbers are displayed for emergency services to locate you quickly and efficiently.

We can allocate a number to any residence or utility building with an accessway.  If you are unsure whether you can order one, you can email the team for clarification.

They have reflective blue numbers for ease of visibility and the FNDC logo to distinguish them from other plates (eg. dairy company plates).
Your RAPID plate should be attached in a prominent position close to your vehicle entrance, which could be on a letterbox, gatepost or wooden fence. Plates are to be fixed parallel to the road.

Click here and select Aerial Imagery

1. Enter one of the following into the search bar - road name; valuation number; Ttitle number; parcel (Lot & DP number) and click on the magnifying glass to search.

A result window will pop up when you click on your property.

2. If the property has a street number it will show here.  If it says a lot number instead such as - Lot 2,  Smith Road - there is no RAPID number allocated.

If you wish to print the map, click the icon at the top right-hand corner of the page.  You can use this map as part of your application.

Your RAPID number will be based on the distance your property is from the beginning of the road on which it is located. The numbers are allocated to properties by measuring, in metres, the distance from the commencement of the road to the centre of the dwelling's driveway. The final measurement is divided by 10, and then rounded to a whole number. Numbers on the right of the road are even, those on the left are odd. For example, a property located 825 metres from the commencement of the road would be numbered 82 if on the right side of the road, or 83 if on the left side of the road. If there is more than one dwelling off a driveway, then a letter e.g. A, B, or C is appended. The first house along will be A, the second B, etc. It is the owner's decision whether they want to put up their own number on the house itself. There are particular protocols for long roads, such as state highways, and where long roads continue through townships.

The maximum length of RAPID numbering is 100km, then the numbering starts again. For this reason, it is important that the locality of the property accompanies the RAPID number e.g. No 2345 SH1, Ōhaeawai.

• SH1 has three sections:
• Whangarei to Ōhaeawai
• Ōhaeawai to Kaitāia (Ōhaeawai is the junction of SH1 & SH12)
• Kaitāia to as far as SH1 goes.

SH10 has two sections as it is just over 100km:

• SH1 (Pakaraka) to Kāeo
• Kāeo to SH1 (Awanui)

SH12 has two sections:

• Dargaville to Ōpononi
• Ōpononi to SH1 at Ōhaeawai

Where a township has no existing numbers, the RAPID numbers are continuous through the township. If urban numbers exist, the RAPID stops at the commencement of the urban numbers and starts again where urban numbers end. However, the distance measurements continue through the town, e.g. Kawakawa (SH1) has urban numbers, so the RAPID stops at 5349 and starts again at 5630.

However, if the town is the point of commencement for a new section (i.e. it's getting close to 100km), then the RAPID ends at the commencement of urban numbering and starts a new series where urban numbering ends. Every attempt is made to avoid overlaps in the numbers in the urban/RAPID changeover. However, there may be some sorting out required where people have 'adopted' a number for themselves. Often, an urban part of the state highway network has its own name which helps.

The RAPID number should be added to the usual RD address e.g. 963 *road name*, RD3 *town*